Home > News > Maintenance Of Geneset Radiator…

Maintenance Of Geneset Radiator

Maintenance Of Geneset Radiator

1.Choose clean soft water

     Soft water usually includes rain, snow and river water. Which contains less minerals and is suitable for diesel generators. Well water, spring water and tap water have high mineral.which are easy to deposit on the tank, water jacket and channel, forming scale and rust, which will make the heat dissipation capacity worse, and easily cause generator to overheat.The impurities in the water will block the water passage and increase the wear of the pump impeller and other components. If use hard water, please softened . The way usually is heating and adding alkal.

2.Change water and clean the pipe regularly

     It is not recommended to change the cooling water frequently, because after using the cooling water for a period of time, minerals have already precipitated. Unless the water has become dirty, it may block the pipes and radiators.Please don’t replace it easily, because even the newly replaced cooling water has been softened, but also contains minerals. That will be deposited on the water jacket and other places to form scale. Replace water more times, the more minerals are deposited and the thicker the scale. Therefore, it should be based on the actual situation of replacing the cooling water. The cooling pipeline should be cleaned when replacing.Can make clean water with caustic soda, kerosene and water. At the same time, maintain each drain switch, especially before entering the winter,please replace the damaged switch in time. Bolts, wooden sticks, rags should not be used instead.

3.Choose high quality antifreeze

     At present, the quality of antifreeze on the market is uneven, and many of them are inferior products. If the antifreeze does not contain preservatives, it will severely corrode the engine cylinder head, water jacket, radiator, water retaining ring, rubber parts and so on, and produce a large amount of scale, which will lead to poor heat dissipation of the generator and overheating. Therefore, it is necessary to use antifreeze from regular manufacturers.

  

 


Scan the qr codeClose
the qr code